Specs At A Glance
- Frame: steel, rectangular tubes 80×50 mm
- Stages: 2-stage legs with tight tolerances
- Motors: dual, speed 38 mm/s
- Noise: low, steady tone during lift
- Controller: handset with up/down and 3 memory keys
- Top (pairing): works great with 1200×600×18 mm DeskLoft tops in White or Black
- Power: DC 30 V, motors rated 4700 RPM
- Safety: reset steps included in the guide for quick re-sync
- Size and packing: bracket 550 mm, feet 600 mm, N.W 21 kg, G.W 23 kg, carton 105 × 31.5 × 23.5 cm.
Standing Desk Key Highlights
This adjustable work desk is built for daily rhythm and clean setups.
- Dual motors with smooth, balanced lift
- Height range: 697–1157 mm
- Load rating: 100 kg even spread
- Memory keypad with 3 presets
- Finish: White and Black
- Warranty: per product page on frame and electronics
Who This Electric Adjustable Desk Fits Best
You want power and calm in a small footprint. DLE-STL2S2M2-CB1AD standing desks keep motion quick yet controlled, then stand firm while you type.
- Home office with a single or dual screen
- Creators who switch between tablet and keyboard
Teams that need repeatable heights across members
Best Standing Desk Size And Fit Guide
Pick comfort first, then pick width.
- Chair first: set knee and hip comfort
- Desk next: save sit height as Preset 1
- Stand height: elbows near ninety degrees, save as Preset 2
- Width pick: 1200 × 600 mm for one screen and notes; wider tops for dual screens
- Clearance checks: wall gap, drawer reach, doorway width
Frame width adjusts 1075–1600 mm, so compact rooms and two-screen layouts both fit without stretching the stance.
What You Get In The Box
In the package of this ergonomic standing desk, you get:
- Frame parts packed in protective cartons
- Legs, feet, cross-beam, brackets, labeled fasteners
- Handset with presets and a clear quick-start sheet
- Care notes; cable tray or power hub if included on your order
What You Get In The Box
In the package of this ergonomic standing desk, you get:
- Frame parts packed in protective cartons
- Legs, feet, cross-beam, brackets, labeled fasteners
- Handset with presets and a clear quick-start sheet
Care notes; cable tray or power hub if included on your order
Installation Options
We install: book a slot in select tiar 1 city Only. We assemble, level feet, route cables, and save two heights so your height adjustable desk feels right on day one.
DIY: average time 35–50 minutes with a hex key set and a Phillips screwdriver. Align brackets, pilot drill when needed, save presets, then tie cables so slack remains during lift.
CTA: Book Installation • Download Guide
Care And Long-Run Tips
- Wipe with a soft cloth and mild cleaner
- Use coasters under hot cups
- Retighten visible screws after week one
- Leave cable slack near the rear edge
- Stay under the 100 kg rated load
Real Setups of Electric Sit Stand Desk
DLE-STL2S2M2-CB1AD fits a coder desk with two 27-inch screens or a creator station with a monitor arm and a soft light. Heights feel natural through the day: sit for deep work, stand for short sprints. Share a photo and your saved heights in a review, and those details help the next buyer get the fit right.
Delivery, Warranty, Returns
Delivery timelines vary by pin code; you receive a tracking link after dispatch. Warranty on frame and electronics follows the product page. Returns work inside policy when the frame stays in original condition with packaging intact. If a part needs attention, send photos or a short clip with your order ID and support will guide the next step.
Links: Delivery • Warranty • Returns
Standing Office Desk FAQs
1) How do I save memory heights?
Move to your sit height, press M, then 1. Set your stand height, press M, then 2. Tap 1 or 2 next time to return exactly.
2) What is the difference between 2-stage and 3-stage legs?
Two-stage covers a solid daily range. Three-stage adds more travel and a steadier feel across short and tall users who share one desk.
3) Will a monitor arm work on this top?
Yes in most cases. Share your clamp model and throat depth; we will confirm a safe clamp zone and a simple protection step before you mount.
4) Can I assemble it myself?
Yes. The average time is 35–50 minutes for one person. Use the guide, pilot drill when needed, and tie cables only after presets so slack stays correct.
5) What happens if the panel shows an error?
Power off, check plugs, then run the reset steps in the guide to re-sync both legs. If the code stays, share a short clip with support so we can help quickly.
A Deal Not to Miss
Ready for an electric height adjustable standing desk that adapts fast and stays firm? Add the AK2DHL-TYZB2-M02 frame, pair a White or Black 1200×600 top, and choose install or DIY. Save two heights, tie cables after presets, and get back to work with less strain and tidy lines every single day with quiet lift.










Reviews
There are no reviews yet.