Sale
DeskLoft Manual Standing Desk Frame
Original price was: ₹44,500.00.₹15,999.00Current price is: ₹15,999.00.
Please, activate Wishlist option to use this widget.
Please, activate Compare option to use this widget.
Pay in 4 interest-free installments for orders over $50 with XStore
DeskLoft Manual Standing Desk ...
Original price was: ₹44,500.00.₹15,999.00Current price is: ₹15,999.00.
Key Highlights
Pure mechanics, tidy build, steady feel.
- Type: Fold-away crank with smooth gearing
- Height range: 690–1130 mm
- Load rating: 80 kg even spread
- Width adjust: 800–1250 mm frame size
- Finishes: White and Black
- Warranty: see product page for frame and parts
Who This Fits Best
Pick DLM-STL2S2M0-CB1AD when power points are scarce or uptime must be certain. The crank gives precise control for small height tweaks and the frame stays calm while typing.
- Home study with a single screen or a light arm
- Schools and labs that prefer no electronics
- Teams needing a reliable backup workstation during outages
Why It Feels Better In Daily Use
The drive is quiet by design. A geared crank converts small turns into steady lift, so you hit the right height without overshoot. The 1-beam reversal column keeps motion aligned, and 600 mm feet hold the stance on tile or wood. Edges are gentle on sleeves, and the fold-away handle stays out of the way when not in use. Cable routes sit near the back so lines do not snag as you adjust.
- Planted feel at tall settings for crisp typing
- Turn-to-lift motion that is controlled and quiet
- Rear routing that keeps cords clear
- Fold-away handle that protects knees
- No power needed, so uptime stays constant
Size And Fit Guide
Dial posture first, then pick width.
- Chair setup: Adjust until hips and knees feel free
- Sit mark: Set wrists neutral, note the handle turns to reach that height
- Stand mark: Elbows near a right angle; record the turns needed
- Surface pick: 1200 × 600 mm suits one display and notes; go wider for a second screen
- Room checks: Small wall gap for cables, drawer reach, doorway width for future moves
Keep in mind: Frame width adjusts 800–1250 mm, so tight corners and small studios both land clean layouts on your height adjustable desk.
Specs At A Glance
- Frame: SPCC steel, rectangular tubes 75×45 mm
- Legs: 2-stage, 1-beam reversal column
- Drive: manual crank, lift rate 6.12 mm per round
- Noise: very low during turn
- Handle: fold-away, removable for storage
- Top pairing: DeskLoft 1200×600×18 mm tops in White or Black, or any size within the width range
- Power: none required
- Safety: simple mechanical reset steps noted in the guide
- Planning data: bracket 500 mm, feet 600 mm, N.W 16 kg, G.W 18 kg, carton 96 × 24 × 18.5 cm.
What You Get In The Box
- DLM-STL2S2M0-CB1AD frame parts in protective cartons
- Legs, feet, cross-beam, brackets, labeled fasteners
- Crank handle, quick-start sheet, care notes
- Cable tray or power hub only if included on your order
Installation Options
We install: In select cities a technician assembles the frame, levels feet, routes cables, and sets your sit and stand marks so day one feels right.
DIY: Allow 35–50 minutes with a hex key set and a Phillips screwdriver. Align brackets, pre-drill where needed, test both heights with the crank, then tie cables so slack stays relaxed during moves.
CTA: Book Installation • Download Guide
Care And Long-Run Tips
- Wipe with a soft cloth and mild cleaner
- Use coasters under hot cups
- Recheck visible screws after the first week
- Keep a small loop at the rear hub for cords
- Stay inside the 80 kg rating with even spread
These small habits protect finish, feel, and lift action over time.
Compare With Similar Models
Choose by power and load.
- DLM-STL2S2M0-CB1AD Manual: no power, 2-stage, precise crank control
- D48 Dual-Motor: 2-stage, higher load and quick presets
- D63 Dual-Motor 3-Stage: extra travel for short users and tall users sharing one base
Real Setups
Set a compact writing desk with a 24-inch screen and a laptop stand. Or kit a lab bench with a light arm and a tray for tools. In narrow rooms, pair DLM-STL2S2M0-CB1AD with 1200 × 600. Share a photo and your turn counts in a review so the next buyer dials their fit faster.
Delivery, Warranty, Returns
The delivery window depends on pin code. A tracking link is sent after dispatch. Warranty for frame parts follows the terms listed on the product page and your invoice. Returns are accepted under policy when the unit is clean and packaging is intact. Need help? Send clear photos or a short clip with your order ID and support will guide the next step.
FAQs
1) How many turns does it take to move between sit and stand.
It varies by your marks. As a guide, moving 100 mm needs roughly 16–17 full turns at 6.12 mm per round. Do a quick count on day one and note the numbers.
2) Can I remove the crank when not using it?
Yes. The handle folds away and can be detached. Store it in the drawer and reattach in seconds when you need an adjustment.
3) Will this frame work with a keyboard tray?
Usually yes. Keep fasteners clear of the column brackets and stay inside the top’s safe zones. Share an underside photo for screw length advice.
4) Is the manual drive hard to turn under load.
With weight spread evenly inside 80 kg, the gearing keeps effort reasonable. For very heavy rigs or frequent changes, consider a dual-motor frame.
5) How do I level the desk on an uneven floor?
Use the adjustable feet. Place a small level on the top, tweak each foot until bubble center, then test at your tall mark. Recheck after two days if the floor slopes.
A Deal to Seal
Want height control without power. Choose DLM-STL2S2M0-CB1AD, add a White or Black top, and pick install or DIY. Note your sit and stand marks, keep cables relaxed, and enjoy calm adjustments with a sturdy, mechanical feel every day.
Reviews
There are no reviews yet.